A good bed back design is the first thing anyone sees when they walk into a bedroom. It has two parts that must agree: the board fixed to the bed, and the wall surface rising behind that board. Get both right and even a plain double bed looks finished.
In Hindi people search for it as bed ke piche ka design, which simply means the design behind the bed. Below are 15 original bed back side designs, from simple wooden boards to full-wall cushion work with hidden lights. Under every picture you will find the mattress size, the wood or board used and the storage type, ready to discuss in the workshop.
If you only want the headboard itself, see our bed headboard design gallery. If you are planning the whole wall, start with bed back wall design.
Modern Trendy Bed Back Design Ideas
These bed back design modern looks use clean lines, two-tone finishes and soft panels. They suit flats where the bedroom is 10 x 11 ft to 12 x 14 ft. A modern bed back design should still be easy to wipe at pillow height.
- SizeQueen 60 x 78 in
- BuildPly, oak veneer, fabric
- StorageHydraulic lift
Vertical grey channels sit inside a slim oak frame, so the bed back feels soft without looking bulky. Good for a young couple's room in a city flat.
Tell your carpenterKeep the oak frame 3 inches wide with firm, dense foam packed into each channel so they stay firm.
- SizeDouble 48 x 75 in
- BuildPly, teal duco, brass
- Storage2 front drawers
A tall arch painted teal behind the bed gives a strong focus wall. The headboard stays low and simple, so the arch does the work.
Tell your carpenterMark the arch centre on the wall first, then align the bed centre to it within half an inch.
- SizeKing 72 x 78 in
- BuildPly, walnut laminate
- StorageLift-up box
The lower half is walnut laminate and the upper half is beige fabric, a layout that hides scuffs where pillows rub. It suits a busy master bedroom.
Tell your carpenterPut the joint line between wood and fabric about 10 inches above the mattress top.
Luxury Modern Trendy Bed Back Design
A luxury bed back design adds height, richer fabric, metal trim and warm light. These need a wall at least 9 ft high and good wiring planned early.
- SizeKing 72 x 78 in
- BuildPly, velvet, SS gold patti
- StorageHydraulic lift
Navy velvet panels run up to the ceiling with stainless steel golden strips between them. Pick it for a roomy master suite where the ceiling is tall.
Tell your carpenterAsk for stainless steel golden patti, not painted strips, so the gold does not fade in humid weather.
- SizeKing 72 x 78 in
- BuildPly, stone laminate
- Storage4 side drawers
A large marble-look laminate slab sits behind a low upholstered headboard, lit from above by a hidden strip. Calm and grand at the same time.
Tell your carpenterUse one large laminate sheet per panel so the stone veins run unbroken across the bed back.
- SizeQueen 60 x 78 in
- BuildSheesham, champagne fabric
- StorageNone, open legs
Curved wings wrap the pillows and deep buttons add a hotel feel. Best in a room wide enough to keep 30 inches free on each side.
Tell your carpenterWings add about 6 inches to frame width, so measure the room against the frame, not the mattress.
Simple Bed Back Design Wooden Ideas
Simple bed back design wooden ideas cost less, clean easily and last for years. A wooden bed back design also handles dust better than fabric.
- SizeDouble 48 x 75 in
- BuildSheesham, natural PU
- StorageLift-up box
One plain sheesham board with soft rounded corners. No cushion, no carving, nothing to collect dust. A good choice for a parents' room.
Tell your carpenterAsk for a 1 inch thick board and a matte PU so the wood grain shows clearly.
- SizeSingle 36 x 72 in
- BuildMango wood, honey polish
- StorageNone, open legs
Spaced vertical slats let the wall colour show through, which makes a small room feel airy. Mango wood keeps the cost lower than teak.
Tell your carpenterKeep slat gaps at 2 inches and sand every slat edge before polish.
- SizeQueen 60 x 75 in
- BuildTeak, clear melamine
- Storage2 side drawers
Three shallow grooves cut across a teak board give detail without carving. Low height keeps the window above it clear.
Tell your carpenterAsk the carpenter to route grooves 6 mm deep and seal them well against monsoon damp.
Double Bed Back Design Latest and Single Bed Options
The double bed back design latest trends are wider than the bed itself, with side tables built in. A single bed back design stays narrow and useful.
- SizeDouble 48 x 78 in
- BuildPly, sand laminate
- StorageHydraulic lift
The bed back extends beyond the mattress at each end and becomes floating side shelves. One unit, no separate tables to buy.
Tell your carpenterMake the full panel 8 ft wide for a double bed, with shelves 22 inches off the floor.
- SizeSingle 36 x 75 in
- BuildPly, white laminate
- Storage3 under drawers
A pegboard back holds hooks and a small shelf, handy in a study room or a guest bed. Easy to change as needs change.
Tell your carpenterFix the pegboard to a frame 1 inch off the wall so hooks can lock in.
- SizeDouble 48 x 75 in
- BuildRubberwood, cane, walnut
- StorageLift-up box
A gentle curve on top and a woven cane centre panel. Light, breathable and cooler in hot months than a padded back.
Tell your carpenterAsk for factory-woven cane sheet and a removable back frame, which makes recaning simple later on.
Bed Ke Piche Ka Design: Full Wall Bed Backside Design
When the whole wall becomes the bed back, shapes like round, curve and L shape come in. These suit rooms where the bed wall has no window.
- SizeKing 72 x 78 in
- BuildPly, sage fabric
- StorageHydraulic lift
A half round cushioned arch above the bed is soft to lean on and looks striking. Best for a bed wall at least 10 ft wide.
Tell your carpenterHave the arch cut on CNC from 12 mm ply so the curve stays smooth.
- SizeSingle 36 x 78 in
- BuildPly, teak laminate
- StorageSide drawers
The bed back turns the corner and runs along the side wall, which suits a bed pushed into a corner. Good for kids or guests.
Tell your carpenterKeep the side run 6 inches above mattress height so it works as a backrest.
- SizeQueen 60 x 78 in
- BuildMDF flutes, beige duco
- StorageLift-up box
Fluted panels with rounded outer corners give a soft, modern bed back wall. The flutes hide minor wall bumps too.
Tell your carpenterAsk for moisture resistant MDF and duco in two coats, sanded between coats.
Every Page in Our Bed Back and Headboard Section
The bed back is a big subject, so we split it into focused galleries. Pick the part you are working on:
- Bed headboard designs: shapes, heights and back rest comfort for the board fixed to the bed.
- Bed back wall: paint, wallpaper, mouldings and niches on the wall behind.
- Bed panel design: PVC, louvers, fluted and wooden panels.
- Window behind the bed: low headboards and curtain ideas when the bed wall has a window.
- Wooden headboards: slats, carving and plain boards in solid wood or ply.
- Headboard cushion: channels, tufting and padded panels on the board itself.
- Bed back cushion: cushion work that covers the wall, even full wall.
- Cushion beds: beds upholstered all round, not just at the head.
- Bed gaddi: the padded gaddi (cushion pad) styles used on Indian beds.
- Bed quilting: stitched quilted patterns for headboards and sides.
- Foam and padded beds: foam grades and padding work.
- Velvet beds: colours, piping and care for velvet.
- Bed sirana: the sirana, our Hindi word for the head end of the bed.
- Beds with lights: LED strips, profile lights and reading lamps.
Bed Design Back Side Sizes: Height and Width by Bed
Most boards stand somewhere between one and two feet clear of the mattress top. A statement bed back climbs higher or covers the whole wall. Use these as starting sizes and adjust to your room.
| Bed | Mattress (in) | Headboard width | Height from floor | Full wall panel width |
|---|---|---|---|---|
| Single | 36 wide, 72/75 long | 40 to 42 in | 36 to 42 in | 5 to 6 ft |
| Double | 48 wide, 75/78 long | 52 to 54 in | 40 to 48 in | 7 to 8 ft |
| Queen | 60 wide, 75/78 long | 64 to 66 in | 42 to 50 in | 8 to 9 ft |
| King | 72 wide, 78 long | 76 to 78 in | 44 to 54 in | 9 to 11 ft |
The mattress top normally lands near knee height, roughly 20 to 25 in off the ground, so a 48 inch board gives roughly 2 ft of back above it.
Materials for the Bed Back Compared
| Material | Looks | Cleaning | Monsoon and termites | Cost level |
|---|---|---|---|---|
| Solid teak or sheesham | Warm, natural grain | Wipe with dry cloth | Teak resists termites well; treat any wood | Higher |
| MR plywood with laminate | Any colour or grain | Very easy | Fine indoors; seal edges | Medium |
| Fabric or velvet cushion | Soft, rich | Vacuum, spot clean | Can hold damp and dust | Medium to higher |
| Leatherette | Smooth, sleek | Wipes clean | Can peel in heat after years | Medium |
| PVC or MDF panels | Fluted, louvers | Easy | PVC is water proof; MDF swells if wet | Lower |
What to Tell the Carpenter About Your Bed Back
- Get the mattress before anything else and hand over its real width and length in inches.
- Say whether the bed back is fixed to the bed or fixed to the wall. Wall-fixed panels let you move the bed for cleaning.
- Give the total height from the floor and where any joint or trim line should sit.
- Plan switches and lights before panels go up. Ask an electrician for concealed wiring and a switch you can reach from the pillow.
- For cushion work, ask the foam density and the fabric code, and see a sample in daylight.
- Ask for anti-termite treatment on all ply and wood, and every laminate edge sealed with banding tape.
Bed Back Problems and Fixes
| Problem | Likely cause | Fix |
|---|---|---|
| Headboard wobbles | Bolted only at two points | Add a third bolt or a wall cleat behind it |
| Oily patch where heads rest | Fabric or light paint behind pillows | Use a wipeable strip or darker fabric at pillow height |
| Laminate edge lifting | Moisture from the wall, poor adhesive | Fresh adhesive, new banding, move the panel off the wall slightly |
| Cushion sagging | Low density foam | Replace foam with higher density |
| Mould on back of panel | Panel fixed tight to an outer wall | Keep 1 inch of breathing space behind it and damp-proof that wall |
Questions people ask
What is the latest bed back design right now?
Right now fluted panels, channel cushions, curved arches and two-tone walls are the most asked for. Hidden warm light along the top edge is also popular. See the bed light designs for wiring ideas.
What does bed ke piche ka design mean?
It means the design behind the bed, so it takes in the board on the bed as well as the surface of the wall. Some people use it only for the wall, others for the headboard. This page covers both.
For a back bed design, which is better: wood or cushion?
Wood is easier to clean and lasts longer in dusty, humid places. Cushion is softer to lean on when you sit up to read. Many people mix the two: a wooden frame with a cushioned centre.
How high should a double bed back design be?
For a double bed, 40 to 48 inches from the floor works for most rooms. That leaves roughly 18 to 24 inches showing over the pillows. Go taller only if the ceiling is 9 ft or more.
Can I add a bed back design to my old bed?
Yes. A wall-mounted panel or cushion board can go behind an old bed without touching its frame. Remove the old headboard if it clashes, or keep it low in front of the new panel.
What is a simple bed back design that costs less?
A plain ply board with laminate, or a painted block of colour on the wall, costs the least. Paint plus a thin wooden trim gives a finished look for little work.
